Specifications

settings07.fm
A31003-H3590-M100-5-76A9, 11/2011
HiPath 3000 Manager E, Administrator Documentation
9-199
Nur für den internen Gebrauch Settings Menu
Settings | System Parameters
9.8.3.16 Analog Station with CLIP
Selecting the CLIP (Calling Line identification Presentation) protocol for analog ports. If „None“
is selected, the feature is disabled system-wide.
This area is only visible if there are analog ports in the system. Note the following restrictions:
– In the case of HiPath 33XX and 35XX, this feature is only supported for the control
cards CBCC and CBCR as of A301 and Z301.
– In the case of HiPath 37XX, this feature is not supported.
– In the case of HiPath 38XX, this feature is only supported for the analog card
S3080010-Q2191-C300.
– This feature is not supported on extension boards
>
CLIP protocols are country dependant.
CLIP Protocol Description
ETSI FSK Type 1 Data transfer with FSK tones between the first and second ring. Protocol
most widely-used worldwide for transferring numbers and names.
Countries: Germany, Austria, Switzerland and many others.
Reference: ETSI EN 300 659-1, Chapter 6.1.1
ETSI FSK Type 2 Data transfer with FSK tones before the first ring. Boot sequence with
special ring.
Countries: France
Reference: ETSI EN 300 659-1, Chapter 6.1.2 b)
ETSI DTMF Type 1 Data transfer with DTMF tones between the first and second ring. "DC"
start-stop signal.
Countries: India and others
Reference: ETSI EN 300 659-1, Chapter 6.1.1 and Annex B
ETSI DTMF Type 2 Data transfer with FSK tones before the first ring. Boot sequence with
reversal and special dual tone.
Countries: Netherlands
Reference: ETSI EN 300 659-1, Chapter 6.1.2 c)