Specifications

Settings Menu Nur für den internen Gebrauch
A31003-H3590-M100-5-76A9, 11/2011
9-220 HiPath 3000 Manager E, Administrator Documentation
settings07.fm
Settings | System Parameters
9.8.10 Time parameters
The adjustable time parameters can be edited via Time parameters.
9.8.10.1 Table
All adjustable time parameters are listed in the table (Description column). The timer value for
each time parameter can be set via the Base and Factor columns. The actual time = Base x
Factor.
If the value 255 is entered in the Factor column, this timer is inactive.
Settings | System Parameters | Time parameters
>
Certain time parameters (see the time parameter table below) were moved to other
tab pages as of Hicom 150 H. Note that changes made to these timers via Time pa-
rameters have no effect in the new communication systems.
Time parameters Effective in the
CP status:
Timer range
P.O.T suffix dialing time code/Receiver activation
time
The timer controls the duration of the connection of the
code receiver with DTMF terminal units and therefore the
ready-to-dial condition. After expiry of this timer the code
receiver will be released.
Dialing 5 – 15 s
Time for activation of P.O.T features
This timer will be activated if the signal key is pressed.
The signal key helps to distinguish whether a subscriber
wants to resume a consultation hold or whether he wants
to activate a feature such as conferencing.
Dialing 2 – 4 s
Reseizure blocking time
This timer is started after trunk release and bars an im-
mediate outgoing seizure during this time.
Release at: 0 – 5 s