Specifications

Settings Menu Nur für den internen Gebrauch
A31003-H3590-M100-5-76A9, 11/2011
9-222 HiPath 3000 Manager E, Administrator Documentation
settings07.fm
Settings | System Parameters
P.O.T. Minimum flash time
(ineffective as of Hicom 150 E Office Rel. 1.0
SW version H)
(as of SW version H, this timer is set via Station view:
Template Editor)
Defines a minimum time for the recognition of a flash
within which the loop must be broken.
P.O.T Maximum flash time
(ineffective as of Hicom 150 E Office Rel. 1.0
SW version H)
For the recognition of the flash a maximum time is deter-
mined, in which the loop must be opened.
Wait time for LCR analog
Queue timeout for LCR analog
0 – 20 s
Time for activation of automatic recall at attendant
console
In case an automatic recall at the attendant console is not
answered during this time, the call will be released.
30 – 180 s
End-of-dialing for 1A dialing
This timer indicates the time after which the last digit will
be dialed out for the 1A procedure. The outdialing of a
digit occurs after input of the next digit. The last digit is di-
aled after expiry of the timer or if it is marked with the end
of dialing indication (#) by the station.
Dialing 4 – 4.5 s
Additional charge time
(ineffective as of Hicom 150 E Office Rel. 1.0
SW version H)
(as of SW version H, this timer is set via Trunks | Param-
eter/Template Editor)
When a trunk is released, incoming call charge informa-
tion (call charge pulses) on analog trunks can be ana-
lyzed by the communication system during this time. The
trunk is blocked for outgoing connections during this time.
Release of ana-
log trunks
Time parameters Effective in the
CP status:
Timer range