Specifications

Settings Menu Nur für den internen Gebrauch
A31003-H3590-M100-5-76A9, 11/2011
9-226 HiPath 3000 Manager E, Administrator Documentation
settings07.fm
Settings | System Parameters
Monitoring a UCD call to an analog line (only for
Development)
Time for activation of an MSI call to a UCD group when
no connection has been set up.
10 – 3810 s
Monitoring transfer to a UCD group prior to answer
(only for Development)
If a transfer to a UCD group occurs prior to an answer, the
timer is started. If the transferred call is not answered, an
automatic recall occurs following the timeout.
10 – 3810 s
USBS timer interval
For access via S
0
port, TA-S
0
, TA-RS232 and TA-API,
the User Signaling Bearer Service (USBS) based on ETS
300 716 is used.
1 – 60 s
Timer for Toll Fraud Monitoring
When this timer expires, an active transit connection is
signaled at the display of the attendant console. The at-
tendant will be able to release the transit call.
This enables the monitoring of transit traffic.
0 – 650 s
Special busy tone, if destination doesn’t answer the
call
After expiry of this timer, the calling subscriber gets the
special busy tone.
30 – 120 s
Special busy tone, if trunk is seized without dialing
In case a subscriber seizes an outgoing trunk without di-
aling, he will get a special busy tone after expiry of the
timer.
20 – 60 s
Calling time transfer before answer on busy station
After expiry of this timer, subscriber A, which has been
transferred from subscriber B to a busy subscriber C, is
transferred back to subscriber B.
15 – 180 s
Time parameters Effective in the
CP status:
Timer range