Specifications

Settings Menu Nur für den internen Gebrauch
A31003-H3590-M100-5-76A9, 11/2011
9-244 HiPath 3000 Manager E, Administrator Documentation
settings08.fm
Settings | Auxiliary equipment
Actuator name
Any name (up to 16 characters in length) can be assigned to the actuators to be administered.
Allocated station, call number
A station that is to be allocated to an actuator can be selected here.
Switching time, factor
Timeouts can be entered here as factors to yield multiples of 100 ms.
Second ringer (Second ringer (W2))
The relay is activated for the allocated station if it is being
called. This relay is deactivated when the called party an-
swers or the call is terminated. This relay is not clocked.
A specific station must be allocated to this relay type. In
the case of this relay type, shutdown can be delayed if a
value greater than 0 has been entered in the ‘Switching
time’ field.
a multple
of 3 sec-
onds.
Call charge pulse The relay is clocked in accordance with the number for
the allocated station on the basis of the incoming call
charge pulses or call charge signals. A specific station
must be allocated to this relay type. The switching time is
not taken into consideration in this case.
always
150 ms
pulse and
150 ms
break.
Station active The relay is activated if the allocated station is active.
This means that the handset has been picked up or the
loudspeaker has been activated. The relay is deactivated
if the allocated station resumes the idle condition. This
means that the handset has been replaced or the loud-
speaker has been deactivated. A specific station must be
allocated to this relay type. In the case of this relay type,
shutdown can be delayed if a value greater than 0 has
been entered in the ‘Switching time’ field.
a multiple
of 100 ms.
See also
– Section 9.6, “Settings | Incoming calls”, on page 9-124
– Section 9.9, “Settings | Auxiliary equipment”, on page 9-238
– Section 9.9.6, “Sensors”, on page 9-250
– HiPath 3000/5000 Feature Description, Actuators
Type Function Switch-
ing time