Specifications

settings08.fm
A31003-H3590-M100-5-76A9, 11/2011
HiPath 3000 Manager E, Administrator Documentation
9-245
Nur für den internen Gebrauch Settings Menu
Settings | Auxiliary equipment
9.9.3 Announcement
Announcement equipment to analog station ports can be connected via Announcement. De-
pending on the communication system, up to 16 devices can be supported.
In Hicom 150 E Office Pro/HiPath 3700, 3750, E&M tie-line ports can be used in addition to
analog (a/b) ports. Up to thirty-two stations can be switched to an announcement device at the
same time.
For UCD, announcement before answer, and DTMF DID, up to sixteen announcement devices
can be connected to the a/b interface on the station side in addition to the MOH sources.
Hicom 150 E Office Pro/HiPath 3700,3750 can also be connected to E&M. Start/stop can be
indicated via relay and sensors or via E&M.
9.9.3.1 Announcement equipment table
The call numbers for the individual announcement devices (ports available for connection) and
the announcement type can be selected in this table.
Ann. device column
The announcement device number is specified by the communication system.
Access column
The connection is defined via Access. Here you select the port to which this device is connect-
ed.
Type of ann. column
The device type connected to the communication system is selected via Type of ann..
A number of different announcement types can be set for announcement equipment:
Settings | Auxiliary equipment | Announcement
>
Analog ports that are set up as announcement ports must be assigned the value An-
swering Machine under Station view: Activated features Extension Type.
>
For Hicom 150 E Office Com/Pro and HiPath 3300 to 3750, this equipment list refers
to the Wait dest. under UCD groups.