Specifications

settings08.fm
A31003-H3590-M100-5-76A9, 11/2011
HiPath 3000 Manager E, Administrator Documentation
9-251
Nur für den internen Gebrauch Settings Menu
Settings | Auxiliary equipment
Announcement setup, phone number
Input of the port to which the announcement device, answering machine or PhoneMail device
is connected.
Message texts box control data
Input of the control string with a maximum of 24 characters for the PhoneMail system (mailbox
call number).
If the connection has been established, the control string is transmitted to the recorded an-
nouncement port. If a recorded announcement port is not available, the control string is trans-
mitted to the destination.
Application example for HiNet VS1600
The failure of the fan is detected by a temperature sensor and is signaled via a LED on the front
panel. If Entry in Error History is activated, this alarm is stored additionally in the error history.
Sensor name/signaling text
Name of the sensor, max. 16 characters
In the case of internal destinations, the sensor name appears in the display.
If Entry in Error History is activated, only up to 10 characters can be entered for the sensor
name.
Number of calls
The number of attempts that are to be made to contact the destination station are entered here.
Timer multipliers
Field Description Multiplier
Call duration The sensor’s tone is signaled for the time specified here
(multiple of 5 seconds).
1 … 255
Call pause The time for the interval between two sensor tones in
multiples of 10 mins.
1 … 255
Block time The time after the response of a sensor in which an indi-
cator change is not forwarded (multiple of 10 mins.).
1 … 255