Specifications

settings08.fm
A31003-H3590-M100-5-76A9, 11/2011
HiPath 3000 Manager E, Administrator Documentation
9-253
Nur für den internen Gebrauch Settings Menu
Settings | Auxiliary equipment
9.9.7 PhoneMail
The settings for PhoneMail are only required for networked communication systems with cen-
tral PhoneMail (both CorNet-N or CorNet-NQ and QSIG). There must be a homogeneous call
numbering plan. These settings need only be made in the PABX satellite systems.
Valid for Rel. 1.0 and Rel. 2.2:
– A port which performs callback must be set up under Stations.
– A port which performs call forwarding to PM must be set up under Stations.
– A port which performs callback must be set up under Stations.
Valid for Rel. 3.0:
– A port which performs callback must be set up under Stations.
– A port which performs call forwarding to PM must be set up under Stations.
– A port which performs callback must be set up under Stations or the callback number
is entered under Connection--> PhoneMail.
Valid for a networked system:
– A port which performs callback must be set up under Stations.
– A port which performs call forwarding to PM must be set up under Stations or the ex-
ternal entries in Call Management under Auxiliary Equipment... > PhoneMail can be
used.
– A port which performs callback must be set up under Stations or the callback number
is entered under Call forwarding.
Settings | Auxiliary equipment | PhoneMail
>
Comment: This procedure replaces the solution using pseudo ports which was gen-
erally implemented for callback access to date. The pseudo port for call forwarding
to PhoneMail is still required.
7
Caution
When using a Phonemail system, the ports of the EVM for voice mail usage must be
decomissioned (see Section 9.9.18, “EVM (Entry Voice Mail)”, on page 9-286 for de-
tails).