Specifications

settings08.fm
A31003-H3590-M100-5-76A9, 11/2011
HiPath 3000 Manager E, Administrator Documentation
9-255
Nur für den internen Gebrauch Settings Menu
Settings | Auxiliary equipment
9.9.8 Integrated Voice Mail (IVM) (only if an IVM card is plugged-in)
IVM is started with 8 or 24 B-channels by default.
The parameters and maintenance settings needed for IVM can be read out and administered
with the HiPath 3000 Manager.
IVM is only available if an IVM card is plugged into the communication system.
The start-up of the IVM ports is analogous to the start-up of a digital station port. In addition,
the station flags are used to set the station port type to Phonemail (5-digit call number).
In the ISDN port flags, the Layer 3 CHI format is set by default to interface type: other interface,
and the call reference length is set to 2.
When configuring a Groups/hunt groups, note that in order to support IVM cards with up to 24
channels, the first group must be used, since the corresponding number of ports is only sup-
ported for the first group. Furthermore, 24 channels are only possible if the type of the group is
set to cyclic or linear. If a cyclic or linear group with 24 channels was created and if this group
is later reconfigured as a normal group, then all channels in the group will be deleted.
9.9.8.1 Mailboxes table
All mailboxes are shown in the table. Every mailbox must be uniquely identified via the index
(=row header).
Mailbox call no.
The call numbers of the individual mailboxes are entered and assigned to the corresponding
index here.
Settings | Auxiliary equipment | Integrated Voice Mail (IVM)
7
Caution
When using an IVM, the ports of the EVM for voice mail usage must be decomis-
sioned (see Section 9.9.18, “EVM (Entry Voice Mail)”, on page 9-286 for details).
Column Type Default value Range
Mailbox ID Read only Consecutive number 1-500
Column Type Default value Range
Mailbox call number Edit control - 1–8 places