Specifications

Settings Menu Nur für den internen Gebrauch
A31003-H3590-M100-5-76A9, 11/2011
9-260 HiPath 3000 Manager E, Administrator Documentation
settings08.fm
Settings | Auxiliary equipment
9.9.9.2 Additional Parameters
Depending on which COS parameters are selected in the Mailboxes table (see Integrated Voice
Mail (IVM) (only if an IVM card is plugged-in)), additional parameters are displayed.
Information on the mailbox The Information on the mailbox parameter is set for each
mailbox with the COS 1. An activated option identifies the
mailbox as an information mailbox and allows the caller to
navigate within the greeting or to listen to it repeatedly.
Automatic hang up after an-
nouncement
If a mailbox has been set up as an Information mailbox, the
automatic hook on after announcement option can be used
to specify whether the mailbox should hang up independently
after it is played back once.
Hunt group code The hunt group code with which this mailbox can be reached
can be selected here.
The value "Standard" in this field means that the mailbox is as-
signed the hunt group code of the first hunt group in which an
IVM station is a member.
If the IVM station is assigned to multiple hunt groups (multi-
customer systems), the mailbox must be assigned a different
hunt group code than the standard.
A selection can be made in such cases from the list of all hunt
groups in which an IVM station is a member. For this reason,
the hunt groups should be configured first.
Route code The route code (trunk group code) with which this mailbox can
seize specific routes (trunk groups) for outgoing communica-
tions can be selected here.
Without an entry in this field, the first route code of the system
is used (to be found under Trunk/Network * Routes).
If you want to deviate from the standard, you must enter the
associated route code of the mailbox if the mailbox has the
Message Call class of service.
Note that the first route code of all routes can be selected in
each respective case.