Specifications

settings09.fm
A31003-H3590-M100-5-76A9, 11/2011
HiPath 3000 Manager E, Administrator Documentation
9-297
Nur für den internen Gebrauch Settings Menu
Settings | Network
Subnet mask
The subnet mask addresses subnets by masking IP address bits. It indicates the size of the
subnet. You can transfer data directly from processor to processor within a subnet without hav-
ing to establish a connection via a router or a gateway.
MTU
The maximum packet length, in bytes, for IP protocol. It can lie within the range of values from
500 to 1500.
9.10.1.5 OSO IP Address area
The IP address of the OpenScape Office Servers in LAN is entered in the input field "OSO IP
Address". OpenScape Office is then connected to HiPath 3000.
9.10.1.6 Area: TFTP server for APS transfer
Using the protocol TFTP (Trivial File Transfer Protocol), files can be transported from one com-
puter to another computer. You can operate the communication system in either the server
mode or the client mode when transporting.
– The communication system in TFTP server mode: The APS is stored on the remote
computer and this APS is loaded into the communication system using a ”tftp –i <IP
address> put <source file name> Hicom.fli” on the remote TFTP-Client. I.e., the client
starts off the APS transfer.
– The communication system in TFTP client mode: Upon activation via the private
SNMP-MIB with ”TFTP Download Action”, the communication system loads an APS
from the administrated TFTP server on its own accord.
The switchover to the transferred APS is realized via SNMP, or in TFTP client mode, at the en-
tered Switchover time.
IP address
IP address of the TFTP server (TFTP = Trivial File Transfer Protocol) that provides the APS
(Application Program System) for the communication system.
Path
Enter the path here where the APS is stored on the remote processor. The complete path is to
be entered.