Specifications

settings09.fm
A31003-H3590-M100-5-76A9, 11/2011
HiPath 3000 Manager E, Administrator Documentation
9-299
Nur für den internen Gebrauch Settings Menu
Settings | Network
9.10.2 IP parameters
The IP parameters are only valid up to HiPath 3000 V1.2. For other versions/variations, similar
settings can be made under Basic settings.
9.10.2.1 Area: IP interface
IP address
The IP address according to the LAN environment is entered here. The IP address is down-
loaded to the COM server and activated. Then the communication system can be reached with-
in an IP network via the IP address of the Com server.
Subnet mask
The net mask addresses subnets by masking IP address bits. It indicates the size of the subnet.
You can transfer data directly from processor to processor within a subnet without having to es-
tablish a connection via a router or a gateway.
Gateway IP address
The gateway is the next router (computer) via which the desired destination (defined by the IP
address) can be reached.
MTU
Enter the maximum Ethernet frame length. Do not change the preset value of 544 if possible!
Settings | Network | IP parameters
>
The IP address must be unique within the network. Any new IP address to be con-
figured should therefore be "pinged" before it is assigned. If the IP address re-
sponds, it should not be assigned again.