Specifications

settings09.fm
A31003-H3590-M100-5-76A9, 11/2011
HiPath 3000 Manager E, Administrator Documentation
9-301
Nur für den internen Gebrauch Settings Menu
Settings | Network
9.10.2.4 Area: Routing table
Network
You should not change the set values.
Subnet mask
You should not change the set values.
Gateway IP address
You should not change the set values.
Station type
You should not change the set values.
9.10.2.5 Area: TFTP server
Using the protocol TFTP (Trivial File Transfer Protocol), files can be transported from one com-
puter to another computer. As a result, Hicom 150 E Office can be operated in both server
mode and in client mode.
– Communication system in TFTP server mode: The APS is saved on the remote pro-
cessor and loaded on the communication system using a ”put_file” of the remote TFTP
client. I.e., the client starts off the APS transfer.
– Communication system in the TFTP client mode: When the Hicom 150 E Office is ac-
tivated with ”Transfer Start” via SNMP, the communication system loads an APS from
a remote processor on its own accord.
IP address
Internet protocol address of the TFTP server (TFTP = Trivial File Transfer Protocol) that pro-
vides the APS (application program system) for the communication system.
Path
Enter the path here where the APS is stored on the remote processor. The complete path is to
be entered.
Switchover time
Enter the time when the communication system should switch to the transferred APS. The time
of day is set in the first text box and the date of the switchover in the second text box. An initi-
ation via SNMP is necessary to trigger an immediate or time-controlled switchover after the
TFTP transfer.