Specifications

settings09.fm
A31003-H3590-M100-5-76A9, 11/2011
HiPath 3000 Manager E, Administrator Documentation
9-303
Nur für den internen Gebrauch Settings Menu
Settings | Network
9.10.3 SNMP Data
SNMP Data is used to enter the data for the default MIB´s. This information can then be sent
to the management station per MIB read (GET).
9.10.3.1 Area: System identification
Enter the data for the default MIB ”RFC 1213” (MIB-2) here. This information can then be sent
to the management station per MIB read (GET). There are no restrictions on the content of the
entries, which are used simply to identify the communication system better to an SNMP man-
agement station.
Contact person
Enter the name of the person who is responsible for technical issues of the communication sys-
tem.
System name
Enter the name of the communication system. Usually, the domain name is entered in the
SNMP world.
Location
Description of the communication system´s location.
9.10.3.2 Trap Flags table
For every type of error that can be signaled via SNMP error message (trap), you can set wheth-
er only one entry is made in the event log or whether a trap is also initiated.
Settings | Network | SNMP Data
Error class Displays the class of the (Class B) error.
Error no. Displays the (Class B) error number.
Meaning This column describes the error in plain text.