Specifications

Settings Menu Nur für den internen Gebrauch

A31003-H3590-M100-5-76A9, 11/2011

9-304 HiPath 3000 Manager E, Administrator Documentation

settings09.fm

Settings | Network

9.10.3.3 Area: Multiple Trap

If error events are configured for Log+multiple trap in the Trap Flags table, then these errors

are signaled multiple times per SNMP trap when a corresponding error event occurs. The num-

ber of times a trap is signaled is specified in Multiple Trap.

9.10.3.4 Area: SNMP Flags

Enable SNMP

This option activates the SNMP (Simple Network Management Protocol) of the communication

system.

CDR Notification Traps

This option is used to generate a trap for CDR applications when the call charge output stack

exceeds a threshold value. Please note, however, that this applies only to CDR applications that

read the call charge stack via TFTP

Port Status Notification Traps

This option causes a trap to be generated whenever a change in the hardware occurs (e.g.,

when cards/telephones are plugged or unplugged). These traps are evaluated by the HiPath

FM to update the hardware tables.

Value This column can be edited, and it determines what should happen when

a Class B error occurs in the communication system:

– Log = The error is saved only in the error history, which can be

read per maintenance.

– Log+trap = The error is saved in the error history and is also

sent as an SNMP error message (trap).

– Log+multiple trap = The error is saved in the error history and

is sent multiple times as an SNMP error message (trap).