Specifications

settings09.fm
A31003-H3590-M100-5-76A9, 11/2011
HiPath 3000 Manager E, Administrator Documentation
9-305
Nur für den internen Gebrauch Settings Menu
Settings | Network
9.10.4 SNMP partner/Communication Partner
The SNMP communications partners (IP remote stations) that receive access rights for the
SNMP functionality of the communication system, are configured via SNMP partner.
9.10.4.1 SNMP Community table
In Hicom 150 E Office Rel. 2.2, other applications (e.g., HiPath 3000 Manager, Telnet or TFTP)
have access only if the corresponding IP addresses of the processor appear in this table.
As of Hicom 150 H V1.0 (Hicom 150 E Office Rel. 3.0), application access will be controlled via
the firewall.
SNMP Transport Label column
Data is managed in this column by double-clicking the corresponding table cell. The following
values can be used:
– a wildcard (Nobody = none, Everybody = all)
– a specific IP address (Specific)
SNMP Community Name column
The community name is used in Version 1 of the SNMP protocol as the access password. When
users of the management station access the communication system using SNMP, they must
specify the community name. For security reasons, it is advisable to change the default com-
munities in accordance with the customer’s instructions.
If the DB Feature Server cannot access the communication system, it reports a „node offline“
status. In this case, the community name „private“ must be entered in the second row. The
SNMP authorization (see next column) for this entry must be set to „read/write“.
Settings | Network | SNMP partner