Specifications

Settings Menu Nur für den internen Gebrauch
A31003-H3590-M100-5-76A9, 11/2011
9-306 HiPath 3000 Manager E, Administrator Documentation
settings09.fm
Settings | Network
SNMP Access column
Traps are sent depending on the activation of SNMP in the firewall.
9.10.4.2 SNMP Trap Community table
The destinations for SNMP error messages (traps) are configured in this table. If a trap desti-
nation is configured, all associated fields should always be filled in.
SNMP Community Name column
This field is used to identify the community to which the trap is assigned. The community also
serves as the access password.
SNMP Address column
Enter the IP address of the trap destination here. Wildcards are not allowed for traps. You can
configure five target addresses for the corresponding management stations in the communica-
tion system.
Target Owner column
You may store a description of the trap destination in plain text.
Target Status column
You can activate or deactivate the configured trap destinations. This means you can temporarily
deactivate configured, known destinations.
read The associated IP address has the right to read only.
read / write The associated IP address has the right to read and write.
none The associated IP address has no access rights. This option is
used to temporarily deactivate entries without having to delete
them.