Specifications

settings09.fm
A31003-H3590-M100-5-76A9, 11/2011
HiPath 3000 Manager E, Administrator Documentation
9-307
Nur für den internen Gebrauch Settings Menu
Settings | Network
9.10.4.3 IP Application table
The applications that are available in the Hicom 150 E Office are activated or made available
here.
– As of Hicom 150 E Office Rel. 2.2:
The possible applications are released under the IP Applications parameter for the
transport label entered under Administration Community.
– As of Hicom 150 H V1.0 (Hicom 150 E Office Rel. 3.0):
In the first column, enter the IP addresses from which the applications are to be start-
ed.
Max. 5 IP addresses can be entered.
If the IP address 0.0.0.0 is entered in the first line, only the HiPath 3000 Manager has
access authorization (default) from all computers on the network.
>
As of HiPath 3000 V1.2, this table is kept under Firewall.
IP address
(as of Hicom 150 H V1.0,
Hicom 150 E Office Rel. 3.0)
In this column, enter the IP addresses from which the applica-
tions are to be started.
Telnet Telnet access is permitted (the Assistant T functionality is of-
fered via Telnet). This means that access to the Hicom 150 E Of-
fice is possible from each processor in the network that supports
the Telnet functionality. Then you can view and use the menu in-
terface of the Assistant T in the Telnet application window.
SNMP
(up to Hicom 150 H V1.0,
Hicom 150 E Office Rel. 3.0)
SNMP accesses are allowed.
CSTA
(as of Hicom 150 H V1.0,
Hicom 150 E Office Rel. 3.0)
CSTA over TCP/IP is allowed.
APS APS transfer over TFTP is allowed.
CDB CDB reading over TFTP is allowed.
HiPath 3000 Manager
(as of Hicom 150 H V1.0,
Hicom 150 E Office Rel. 3.0)
HiPath 3000 Manager access over TCP/IP is allowed.
Log Reading the log file over TFTP is allowed.
Call detail recording Outputting charges via TFTP is permitted.
ASCII Reading the system’s basic configuration over TFTP is allowed.