Specifications

settings09.fm
A31003-H3590-M100-5-76A9, 11/2011
HiPath 3000 Manager E, Administrator Documentation
9-311
Nur für den internen Gebrauch Settings Menu
Settings | Network
Callback
A remote station that is calling must transmit its calling party number in the D channel of the
PSTN connection. If callback is activated, then the connection is rejected by the communication
system, and the administered partner is then called back immediately. This prevents a non-au-
thorized remote station from calling in. The call back function works without a connection at the
initial call, so that costs arise only for the side calling back.
Remote analog modem
This point must be activated if the partner is an analog modem.
IP mapping
This parameter indicates whether IP mapping should be carried out.
9.10.6.2 Area: Security
User ID
The identification for PAP, CHAP or the corresponding user identification of the service provider
is entered in this location.
PAP activated / CHAP activated
For the use of the PAP and/or CHAP security mechanism within the PPP protocol, PAP or
CHAP must be activated in this location.
PAP Host / CHAP Host
This point determines whether the remote station or the communication system should begin
the authentication.
– Host activated means: the calling partner must authenticate itself with the communi-
cation system.
– Host deactivated means: HiPath 3000 can authenticate itself with the calling partner.
Password
The appropriate password for either PAP or CHAP is entered here.