Specifications

Settings Menu Nur für den internen Gebrauch
A31003-H3590-M100-5-76A9, 11/2011
9-312 HiPath 3000 Manager E, Administrator Documentation
settings09.fm
Settings | Network
9.10.6.3 PSTN partner table
A PSTN partner consists of a maximum of 5 call numbers. If the partner is to be reached from
the communication system, then a connection attempt is first initiated to the first call number
marked as outgoing. If this fails (according to the number of administrated redials, see Basic
settings), the next entries marked as outgoing are dialed one after another, until either the con-
nection can be made or until no additional numbers are available.
Call number
The PSTN call number at which the partner can be reached. It must be unique within the overall
configuration and can consist of up to 22 decimal digits (0-9). In addition, a hyphen may be in-
serted for separating the necessary trunk seizure digits.
Call direc.
This is used to lay down the characteristic of a connection.
9.10.6.4 Area: Record no.
Record no.
The number of the entry is displayed next to Record no.:.
<, >
The buttons > and < can be used to scroll between the PSTN partner entries that are already
configured.
New
A new entry is set up using the button New.
Blocked The number is not used
Incoming This call number is taken into account during the call number
test of incoming calls (this entry is not used for the determina-
tion of the outgoing connection).
Outgoing This entry is used to determine the call number of the outgoing
connection (but is not taken into account during the call number
test of incoming calls).
In+Out This entry is used for the determination of the call number of the
outgoing connection and is also taken into account during the
call number test of incoming calls.