Specifications

Settings Menu Nur für den internen Gebrauch
A31003-H3590-M100-5-76A9, 11/2011
9-318 HiPath 3000 Manager E, Administrator Documentation
settings09.fm
Settings | Network
9.10.9 Firewall | Edit application firewall
To edit the parameters, double-click the corresponding table cell Firewall.
9.10.9.1 Area: Source IP addr.
The source IP address of the client application is to be entered here. By declaring a network
address (Class A, B or C), the corresponding network is released.
Specific, Everybody
Determines whether only the entered IP address (Specific) or every IP address (Everybody)
is enabled in the firewall. If "Everybody" is set, no IP address can be entered.
9.10.9.2 Applications table
By marking the desired application with a cross, it is released to the IP addresses entered.
Settings | Network | Firewall | Edit application firewall
>
For the server IP address entered via HiPath 5000 RSM/AllServe Parameters, all
system applications are accessible without an explicit entry in the application fire-
wall.
Telnet The Assistant T functionality is offered via Telnet.
CSTA CSTA over TCP/IP is allowed.
APS APS transfer over TFTP is allowed.
CDB CDB reading over TFTP is allowed.
HiPath 3000 Manager HiPath 3000 Manager access over TCP/IP is allowed.
Log Reading the log file over TFTP is allowed.
Call detail recording Picking up call charges over TFTP is allowed
(CDRS,CDRT,CDRC).
ASCII Reading the system’s basic configuration over TFTP is allowed.
IVM FTP Board access is enabled via IVM FTP.
IVM TFTP Board access is enabled via IVM TFTP.
IVM SSH Board access is enabled via IVM SSH.
IVM HTTP Board access is enabled via IVM HTTP.