Specifications

settings09.fm

A31003-H3590-M100-5-76A9, 11/2011

HiPath 3000 Manager E, Administrator Documentation

9-321

Nur für den internen Gebrauch Settings Menu

Settings | Network

9.10.11 Routing | Edit IP routing

To edit the parameters, double-click the corresponding table cell Routing.

IP address

This is the IP address of the destination system or network. If the associated Subnet mask is

255.255.255.255, then a single system is assumed; otherwise, the IP address is interpreted as

part of a network. In the latter case, the IP address 0.0.0.0 is also authorized. Using this setting,

the accompanying Gateway is classified as a default gateway.

Subnet mask

The subnet mask addresses subnets by masking IP address bits. It indicates the size of the

subnet. You can transfer data directly from processor to processor within a subnet without hav-

ing to establish a connection via a router or a gateway.

Gateway

The gateway is the next router (computer) over which the desired destination (described by the

IP address) can be reached.

Record no. , <, >, New, Back

The number of the entry is displayed next to Record no.:.

The buttons < and > can be used to scroll between the routing entries that are already config-

ured.

A new entry is set up using the button New.

Back returns you to Routing. There the data entered can be finally applied or rejected.

Settings | Network | Routing | Edit IP routing