Specifications

System Status Menu Nur für den internen Gebrauch

A31003-H3590-M100-5-76A9, 11/2011

10-24 HiPath 3000 Manager E, Administrator Documentation

status.fm

Call charges

10.2.3 Output format

Output format is used to set parameters for call detail recording and the format for call records.

Call records, also known as CDR (Call Detail Records) or SMDR (Station Message Detail

Records), provide accurate information about trunk calls into and out of the communication sys-

tem.

10.2.3.1 Area: Format of Call Records

Parameters pertaining to call record format are determined through a series of system-wide

flags that can be turned on or off. These parameters control the format of the call detail record

for output via the serial interface.

Flag: Compressed Output

There are two basic formats:

– compressed display

In compressed form, the data records are output without separating blanks, with a

project code, and charge rate units are always specified in pulses. This format is par-

ticularly suitable for further processing data using a call charge computer or PC.

– long form

In long form, the data fields are separated by blanks, the call charges are output in cur-

rency units, and a project code is not logged. This format is particularly suitable for

printing.

If you want to print your data, leave this flag off.

Flag: Last 4 Digits Suppressed

The system can be configured to suppress the last four digits of the call number field and re-

place them with a ?. This way individual calls remain private. This is a security feature.

System Status | Call charges | Output format

For Call Detail Recording Central (CDRC), it is necessary to enter a trunk code for

the QSIG trunks (see code Settings | Lines/networking). The codes are deleted

when call numbers are deleted and a CDRC is then no longer possible.