Specifications

System Status Menu Nur für den internen Gebrauch
A31003-H3590-M100-5-76A9, 11/2011
10-26 HiPath 3000 Manager E, Administrator Documentation
status.fm
Call charges
Flag: Outgoing without connection
Outgoing calls that are not answered are displayed anyway. The caller can thus prove that he
attempted to call, but was not successful.
Output LCR number outgoing or dialled number incoming
If this flag is activated, an additional phone number field is added to the call data record. It con-
tains:
● for an outgoing call: the LCR phone number that was actually sent to the exchange follow-
ing conversion by LCR or
● for an incoming call: the internal phone number of the station required, that is, the first sta-
tion dialed.
A call record is then output, even if a call is made for a busy station. This call record has the
same format as the data record created for a free station except that the ring/call duration is set
to "0".
10.2.3.2 Area: Connection data routing
As of Hicom 150 H V1.0 (Hicom 150 E Office Rel. 3.0), these parameters are administered un-
der QSIG features (not in the USA).
The following new customer database data must be configured in the communication system
for the connection data routing:
– Call number destination system (recording system)
– Separate system number for identification in the network
– Separate group ID for identification in the network
In a network consisting of several communication systems, any connection information that oc-
curs (CDRC data) in the PBX satellite systems is sent to a fixed communication system in the
network. For this purpose, the call number of the destination system (call number of central re-
cording system) to which the connection data is sent is configured in each communication sys-
tem.