Specifications

status.fm
A31003-H3590-M100-5-76A9, 11/2011
HiPath 3000 Manager E, Administrator Documentation
10-27
Nur für den internen Gebrauch System Status Menu
Call charges
10.2.3.3 Area: Port assignment
Which applications are supported on which V.24 interfaces can be configured using Port as-
signment.
As of Hicom 150 E Office Rel. 2.2:
In order to make the connection of a call detail printer or a call detail PC more flexible, the output
can be made to a TP-AP12 adapter in addition to the V.24 ports. This adapter is operated as a
bay option on system telephones. This makes it possible to output the charges to any U
P0/E
port with a TA-API2 adapter. Only one adapter per call detail output is supported in the com-
munication system.
As of Hicom 150 H V1.0 (Hicom 150 E Office Rel. 3.0):
The call charges can be output via a LAN in 3 different modes. In this case, additional param-
eters can be set up under Output format | LAN settings.
Call Detail Recording Central (CDRC)
The parameters in this area are used for configuring the applications to be supported at the
various V.24 (RS-232) interfaces. In the USA, there are a limited number of call charge record-
ing features for which application interface parameters must be set.
Output format
The selection activates CDR and directs the call data to the appropriate port type.
V.24 port
In this field you specify which V.24 interface should be used for the CDR system output. You
don’t need to set this specification unless you selected V.24 as the Output format.
UPN port
In this field, you specify which UPN (system telephone) interface should be used for the output
of call detail recording. You don’t need to set this specification unless you selected UPN as the
Output format.
Attendant P
In this field, you specify which system telephone should be used for the output of call detail re-
cording. No setting needs to be made here unless Attendant P was selected as the Output for-
mat.
Call charges per station (not in the USA)
Charges that accumulate at a station are output to the port that is set up.