Specifications

status.fm
A31003-H3590-M100-5-76A9, 11/2011
HiPath 3000 Manager E, Administrator Documentation
10-29
Nur für den internen Gebrauch System Status Menu
Call charges
10.2.4 Output format | LAN settings
LAN settings are displayed by clicking on the LAN settings button in the Output format tab.
As of Hicom 150 H V1.0 (Hicom 150 E Office Rel. 3.0), the call charges can be output via LAN
in 3 different modes. In this case, additional parameters can be set up via LAN settings.
10.2.4.1 Area: Call Detail Recording Central (CDRC)
Call charges can be recorded via LAN with three different output modes. The corresponding
method is selected in accordance with the application connected.
TFTP client
Call charge data is sent to an external application by the TFTP client. Transmission is controlled
by a centrally-adjusted timer (e.g., every 10 minutes) and a fixed threshold value (when around
80% of the internal call charge buffer is full). A connection to the TFTP server is set up at the
appropriate time, all existing call charge data is transmitted in a file and the connection is then
terminated. If the server connection cannot be set up, an alternative server is addressed.
A new file name is used for each session.
The IP addresses of both servers (with a fixed Port 69) and the timer can be configured via
Server 1, Server 2 and Cycle.
TCP client
If call charges have been incurred, a TCP/IP connection to an external call charge server (ex-
ternal application) is initiated by the client. When the connection has been set up, the call
charge data is transmitted. The connection remains permanently open, and any other charges
that occur are transmitted. Each data record is therefore transmitted individually.
The TCP/IP address of the server can be configured via IP address.
TFTP Server
An external application requests output of call charge data via a TFTP client. In order to do this,
the application must set up a connection and request the call charge data. All existing call
charge data is then transmitted and the connection is terminated.
System Status | Call charges | Output format | LAN settings