Specifications

System Status Menu Nur für den internen Gebrauch
A31003-H3590-M100-5-76A9, 11/2011
10-34 HiPath 3000 Manager E, Administrator Documentation
status.fm
Call charges
10.2.6 Account codes
Account codes (Acc. code) is used to assign call charges the account codes.
A checking procedure allows the communication system to check project codes entered by the
user based on the number of digits entered, or by matching the code against a list that has been
created.
The current units per station are displayed for each station or line in Stations (Not in the USA)
and Trunks (Not in the USA).
10.2.6.1 Area: Checking procedure
You can use Checking procedure to determine whether or not the communication system re-
quires users to enter valid account codes before their calls can be completed. You make your
selection by choosing the appropriate option.
No check
With this selection, the account code is not checked at all. This option is not possible if there
are routes with a mandatory entry procedure. (See also Entry procedure).
List check
With this selection, the account code is checked against a list of account codes that you create.
Only valid entries are accepted (only possible for OfficeCom, OfficePro and HiPath 3300 to
3750).
Check number of characters
With this selection, only the number of characters entered is checked. You determine how many
characters are permitted by using the Characters to be checked list. You can select from one
to eleven.
System Status | Call charges | Account codes