Specifications

status.fm
A31003-H3590-M100-5-76A9, 11/2011
HiPath 3000 Manager E, Administrator Documentation
10-35
Nur für den internen Gebrauch System Status Menu
Call charges
10.2.6.2 Table: Entry procedure
Entry procedure is used to determine, route by route, whether entering an account code is
optional or mandatory. For each of these you have the option of making account code entry op-
tional or mandatory. The standard procedure is here Optional.
This item cannot be configured if LCR has been activated. The previous settings are retained.
The account code can then be configured as an Optional or Mandatory entry under Dial plan.
– Optional
If you leave the Optional selection in place, users can enter an account code, but are
not required to do so. An account code can be entered by all terminals (U
P0/E
, a/b,
Cordless, S
0
) before the call begins, i.e., even before line seizure. Only a U
P0/E
can
enter an account code during an incoming or outgoing external call.
– Mandatory
requires in any case a check. If you change to the Mandatory selection, users cannot
make an outgoing call using that route without entering a valid account code.
An account code is optional for incoming calls; this will be checked in accordance with
its programmed variants.
10.2.6.3 Table: Account code lists
If you select the List Check option in the Checking procedure area, you must create an Ac-
count code list with which the communication system can check the user-entered codes. The
column on the left contains numbers 0 through 999, so you can enter up to 1000 account codes.
Account codes can contain up to eleven digits; alpha characters are not permitted.
10.2.6.4 Check button
The account codes entered are checked to ensure that they are unique.
7
Keep in mind, however, that this is a system-wide setting. If you select Mandatory
for a route, all stations are required to use account codes to dial out using that route.
If you want some users to use account codes and other users not to use account
codes, you must program different routes.
7
Note, however, this terminology may be a little confusing. You can enter up to 1000
account codes, each of which is called List 1, List 2, etc. This does not mean, that
you can create 1000 account code lists.
See also
– Section 10.2, “Call charges”, on page 10-21
– HiPath 3000/5000 Feature Description, Account code