Specifications

Options Menu Nur für den internen Gebrauch
A31003-H3590-M100-5-76A9, 11/2011
12-10 HiPath 3000 Manager E, Administrator Documentation
options.fm
Program Options
Number Redial
This parameter defines how many times the system should attempt to dial the number. Valid
values range from 0 to 999 times. The default is 10 times.
Release at
This parameter defines the time after which the connection between the PC and the communi-
cation system is automatically released. The release time begins on completing the adminis-
tration activity. The valid range is between 60 and 9999 seconds. If the value 0 is entered, then
the connection is not automatically released depending on the time.
12.1.3.5 Area: Interface
Port
The Port drop-down list box is used to select the COM port number (COM 1 to COM 4) and to
thus notify HiPath 3000 Manager to which port the connection cable to the communication sys-
tem is attached or, in the case of a modem connection, which port is used by the modem. The
default is COM 1.
Baud Rate
The appropriate baud rate is selected here. The default setting is 9600.
It is important that the baud rate set here matches the baud rate in the communication system.
12.1.3.6 Area: Own MSN (CAPI 2.0)
In the case of a CAPI 2.0 connection, the MSN (Multiple Subscriber Number) of the port at
which the PC ISDN card is connected is entered in this field.
12.1.3.7 Area: HiPath 5000 RSM/AllServe Server
Name or IP address of the server on which the DB Feature Server is installed. This entry is the
default setting for the Transfer | HiPath 5000 RSM/AllServe Server dialog.
12.1.3.8 Area: RMM Server, Server, Password
Server
The computer name of the server on which the RMM server application is running is entered
under Server.