Specifications

Starting up HiPath 5000 RSM/AllServe Nur für den internen Gebrauch
A31003-H3590-M100-5-76A9, 11/2011
4-18 HiPath 3000 Manager E, Administrator Documentation
allserve.fm
Configuring Stations for the Use of Non-Voice Services
4.5.2 IP network
Configuration is performed via WBM in an IP network environment. The Routing item is used
for two settings in the program.
1. All nodes in the IP network must be entered with a unique node number and the associated
IP address under the entry Voice Gateway | PBX node.
2. The station call numbers and their node number which should be reached by the HiPath
HG 1500 card to be configured are entered under Voice Gateway | PBX routing. It may
also be necessary to adapt the assigned service (voice, fax, modem).
The access authorization flag must be set via HiPath 3000 Manager under Settings | Network
| HiPath 5000 RSM/AllServe Parameter in the field HiPath 5000 RSM/AllServe access au-
thorization for the corresponding HXGM/HXGS card.
>
The default setting "Voice" must be used for digital data transfer via X75.
>
CO–CO transit cannot be supported in a call-number-protected service evaluation.
Similarly, it is not possible to reach multiple services via a single call number (e.g.,
fax or S
0
card with miscellaneous services under an MSN).