Specifications

allserve.fm
A31003-H3590-M100-5-76A9, 11/2011
HiPath 3000 Manager E, Administrator Documentation
4-19
Nur für den internen Gebrauch Starting up HiPath 5000 RSM/AllServe
Parameterizing for Media PC Streaming 1.0 (not in the USA)
4.6 Parameterizing for Media PC Streaming 1.0 (not in the USA)
This section describes the setup of the communication system for Media Streaming. Note that
Media Streaming is also possible without the HiPath 5000 RSM/AllServe server.
The steps described here are performed via the HiPath 3000 Manager and the WBM of the
HG 1500, for example, and are typical for a stand-alone system with a communication system
and a server in a networked system .
In addition to the existing communication system configuration, an access code must be as-
signed for each of the services fax, voice mail and announcements in connection with Media
Streaming, where each access code is assigned a route.
Read the CDB from a networked system
1. Select the menu item File | HiPath 5000 RSM/AllServe | Transfer | HiPath 5000 RSM/
AllServe Server.
2. Then click the Server -> Manager button.
The CDB is read.
Read the CDB from a stand-alone system
1. Select the menu item File | Transfer.
2. Click the System -> PC button.
The CDB is read.
Topic
– Abschnitt 4.6.1, “Route configuration”
– Abschnitt 4.6.2, “Configuring LCR”
– Abschnitt 4.6.3, “Media Streaming in the network”
– Abschnitt 4.6.4, “Configuring an HG 1500 card for Media Streaming”
– Abschnitt 4.6.5, “Configuring announcements in connection with Media Streaming
and HPCO”
– Abschnitt 4.6.6, “Configuring cross-node ACD groups”
>
Before you configure the communication system for Media Streaming, create a
backup copy of the existing CDB.