Specifications

Starting up HiPath 5000 RSM/AllServe Nur für den internen Gebrauch
A31003-H3590-M100-5-76A9, 11/2011
4-20 HiPath 3000 Manager E, Administrator Documentation
allserve.fm
Parameterizing for Media PC Streaming 1.0 (not in the USA)
4.6.1 Route configuration
When configuring networked systems, system networking must be performed via a "Trunk HG
1500 card" and the media PC must be connected via a separate "Media HG 1500 card" for the
Payload Switching feature in connection with Media Streaming. These cards have the same
hardware and software expansion level but a different configuration.
Configuring Route 15
This step configures Route 15 for the media card.
1. Select the menu item Settings | Lines/networking and then click on the Routes tab.
2. Select Trk Grp 15 and assign a unique name, e.g., Media HXG, under Route Name.
3. Click Apply.
Configuring Route 16
This step configures Route 16 for a LAN. Route 16 LAN is used with a server PC both in IP
trunking and Media Streaming.
1. Select the menu item Settings | Lines/networking and then click on the Routes tab.
2. Select Trk Grp 16 and assign a unique name, e.g., IP Trunk, under Route Name.
3. Click Apply.
Allocating routes to newly configured trunks
In this step, the newly created trunks are assigned to Route 16 (LAN) and a corresponding pro-
tocol.
1. Select the menu item Settings | Lines/networking and then click on the Trunks tab.
2. Assign route 16 (IP Trunk) to the new trunks created on the HXGM card one after the other
(e.g., slot 5).
3. Assign route 15 (Media-HXG) to the trunks just configured for the media card (e.g., slot 4).
Allocating a protocol
1. Double-click the Param column.
2. Assign the protocol HXGM/HXGS: Trunk Cornet Plus ... to the new trunks created.
3. Assign the protocol HXGM/HXGS: CorNet Variant 2 Master direct Xpressions to the me-
dia card.
4. Confirm with Apply.