Specifications

Starting up HiPath 5000 RSM/AllServe Nur für den internen Gebrauch
A31003-H3590-M100-5-76A9, 11/2011
4-22 HiPath 3000 Manager E, Administrator Documentation
allserve.fm
Parameterizing for Media PC Streaming 1.0 (not in the USA)
4.6.2 Configuring LCR
The configuration steps described here apply both for node 1 with Media PC and trunk card
and for every other node with a trunk card.
1. Select the menu item Settings | Least cost routing and then click the Codes and Flags
tab.
2. Activate the options Activate LCR and Digit-by-digit.
Configuring the dialing rules table for a LAN
The configuration steps described here apply both for node 1 with Media PC and trunk card
and for every other node with a trunk card.
1. Click the Dialing rules table tab.
2. Create a dial rule that provides the rule format E1A with the procedure Corporate net-
work.
3. Then click Apply.
Configuring route tables for node 1
The configuration steps described here only apply for node 1 with a Media card.
1. Click the Route table tab.
2. Link the previously configured dial rule to route 15 (Media-HXG).
3. Then click Apply.
Configuring route tables for all other nodes
The configuration steps described here only apply for all other nodes in the networked system
with trunk card.
1. Click the Route table tab.
2. Link the previously configured dial rule to route 16 (IP Trunk).
3. Then click Apply.
>
Please note the different configuration of the LCR in node 1 (with Media PC card)
and the following nodes with only one trunk card.