Specifications

allserve.fm
A31003-H3590-M100-5-76A9, 11/2011
HiPath 3000 Manager E, Administrator Documentation
4-23
Nur für den internen Gebrauch Starting up HiPath 5000 RSM/AllServe
Parameterizing for Media PC Streaming 1.0 (not in the USA)
Configuring dial plans
This tab is used to configure the respective access codes for the announcements, fax and voice
mail services which are later bound in the PCO to the corresponding protocol.
The configuration steps described here apply both for node 1 with Media PC and trunk card
and for every other node with a trunk card.
1. Select the Dial plan tab.
2. Assign a dialed digit string to the above-mentioned route table.
3. Transfer the CDB to the communication system.
Transferring the CDB to a networked system
1. Select the menu item File | HiPath 5000 RSM/AllServe | Transfer | HiPath 5000 RSM/
AllServe Server.
2. Then click the Manager -> Server button.
The CDB is transferred. Communication system access to the Media PC is now created.
4.6.3 Media Streaming in the network
The service access codes and the LCR configuration are created for a networked system. As
a result, no more entries are needed in HG 1500 card for PBX nodes and call number ranges.
Only the Netwide data dialog is to configured.
1. Select the menu item Netwide data | Netwide data (Media Attachment Devices).
2. Enter the IP address of the trunk card from node 1 and enter the access codes for the in-
dividual services.
3. Transfer the CDB to the communication system.
4.6.4 Configuring an HG 1500 card for Media Streaming
The configuration steps described below are performed via WBM and only apply for the Media
HXG card in node 1. All other HXG cards automatically receive their setting for PABX routing
from the server through the settings under Media Attachment Devices (Car table). The access
codes for the individual services and the IP address for the application server are also config-
ured here.
The HG 1500 card must be basically configured in accordance with the HG 1500 Service Man-
ual as a prerequisite for HG 1500 connection to the server. The card consequently has a per-
manent IP address and is available in the LAN.