Specifications

Starting up HiPath 5000 RSM/AllServe Nur für den internen Gebrauch
A31003-H3590-M100-5-76A9, 11/2011
4-24 HiPath 3000 Manager E, Administrator Documentation
allserve.fm
Parameterizing for Media PC Streaming 1.0 (not in the USA)
Configuring cards
1. Read the card’s current CDB.
2. From the Voice Gateway level, select the menu PBX Node.
3. Click the Pencil icon to add a new node.
4. Enter an appropriate node ID followed by the IP address of the Application server.
5. Enter the values described in the table below for each parameter.
Entering call number ranges
The relevant access codes are to be entered here for the voice, fax and announcements ser-
vices (as for the configuration in HiPath 3000 Manager). The communication systems an-
nouncement service must provide a voice band on the HG 1500.
1. Click the PBX routing level in the menu tree.
2. Click the Pencil icon
3. Enter the access code for the relevant service and bind it to the previously configured node
(communication system, Media PC).
4. Click the new access code in the menu tree and select the previously configured access
code for the relevant service.
5. Proceed as described in steps 1 through 3 for the other services.
The access codes configured in the communication system are now sent by the HG 1500
card to the server on which Media Streaming is running.
Parameter Value
PBX node 1
Audio Codecs G.711 a-law, G711 U-Law, G.723 (in this sequence)
PBX node monitoring activated
Packeting 1
IP address customer-specific
IP address 0.0.0.0