Specifications

feature.fm
A31003-H3590-M100-5-76A9, 11/2011
HiPath 3000 Manager E, Administrator Documentation
5-5
Nur für den internen Gebrauch Implementing Features
Features for General Incoming Traffic
Call Waiting Tone/Call Waiting Enable system-wide call wait-
ing when busy:
Intercept / Attendant, Call
waiting on busy
Enable immediate call waiting
when busy by port:
Trunks | Parameter/General
Flags, Enable immediate call
waiting when busy
Call waiting for internal calls:
If an internal station is busy,
the calling party receives a
busy signal. Five seconds lat-
er, the busy party receives a
display message indicating
that a call is waiting, and the
call waiting tone is activated.
For the calling party, the busy
signal changes to a ring tone.
The busy party can answer
the call using the "Accept call
waiting" function.
Call waiting for CorNet:
Call waiting is activated imme-
diately.
Immediate call waiting when
busy for internal calls:
If an internal station is busy,
the calling party receives a
ring tone. The busy party is in-
formed that a call is waiting by
a display message and a call
waiting tone. The busy party
can answer the call using the
"Accept call waiting" function.
Call Waiting Tone: (External
call)
If a busy internal station re-
ceives a call from the public
network, the busy station im-
mediately receives a message
indicating that a call is waiting.
Any ISDN information (CLIP)
is displayed on the screen if
the calling party has enabled
this feature.
Call Management (CM) Settings | Incoming calls -
Feature Setup Testing