Specifications

feature.fm
A31003-H3590-M100-5-76A9, 11/2011
HiPath 3000 Manager E, Administrator Documentation
5-13
Nur für den internen Gebrauch Implementing Features
Features for Incoming External Traffic
Intercept Conditions Intercept / Attendant Intercept no answer:
Seize the trunk and call any
station in the communication
system using DID.
The called station is switched
to the intercept position or the
call forwarding station in ac-
cordance with the ring cycle.
Intercept busy:
Set up an external or internal
call from a station.
Use DID to attempt to reach
this station via the trunk.
The call is either signaled at
the intercept position or for-
warded as entered in CM.
Intercept if incomplete or in-
valid number dialed:
Seize the trunk and use DID to
dial any station in the system
with an incomplete station
number (for instance, omit the
third digit in the three-digit DID
number).
The call is routed to the inter-
cept position.
Seize the trunk and dial a DID
number that does not exist in
the system.
The call is routed to the inter-
cept position.
Intercept if no number di-
aled:
Seize the trunk and dial the
communication system station
number without a DID num-
ber.
After a timeout, the call is in-
tercepted or released.
Feature Setup Testing