Specifications

feature.fm
A31003-H3590-M100-5-76A9, 11/2011
HiPath 3000 Manager E, Administrator Documentation
5-15
Nur für den internen Gebrauch Implementing Features
Features for Outgoing External Traffic
5.6 Features for Outgoing External Traffic
Feature Setup Testing
Last Number Redial (LNR) Enable redial with ACCT
throughout the system:
Flags
Set up an external connection.
Release the external connec-
tion.
The dialed number is in the re-
dial memory.
If “redial with ACCT” is en-
abled,
enter ACCT.
Press the redial key. Press the
redial key to step through the
stored numbers (and the AC-
CT).
The system dials the station
number (ACCT) after a short
waiting time.
System Speed Dialing Speed dialing system, Enter
the trunk group code, station
number, and name for the de-
sired speed-dialing destina-
tion
Access the speed-dialing des-
tination by entering a code (*7
+ destination number) or using
a key + destination number.
The system sets up an exter-
nal connection.
System Speed Dialing in Ten-
ant Systems
Speed dialing system, Enter
the trunk group code, station
number, and name for the de-
sired speed-dialing destina-
tion
Administer the speed-dialing
number range under Group
assignment.
Access the speed-dialing des-
tination by entering a code (*7
+ destination number) or using
a key + destination number.
The system sets up an exter-
nal connection.
Trunk Seizure Type and Prime
Line On (Automatic Line Sei-
zure)
Configure Prime Line on:
Routing parameters
Assign trunk group:
Trunks
Configure trunk keys/call
keys:
Key programming
Configure Prime Line on.
Dial a number.
The trunk is automatically
seized.