Specifications

HiPath 3000 System Overview For internal use only
P31003-H3560-X100-1-7618, 09/05
2-100 HiPath 3000/5000 V6.0, System Description
3000sb2.fm
HiPath 3300
Interfaces
● Eight U
P0/E
(digital subscriber line interfaces)
Up to three BS3/1 base stations can be connected directly for HiPath Cordless Office.
● Four T/Rs (analog subscriber line interfaces)
● Two S
0
interfaces (trunk or subscriber or fixed connection)
● One V.24 interface
2.10.3.2 UPSC-DR
Introduction
This board combines the power supply and battery management functions. No other compo-
nents are required if operated as a power supply. To maintain short-term battery emergency
operation after a power failure, that is, to use uninterruptible power supply functions, you must
also connect a battery pack.
Technical specifications
● Nominal voltage range: 100 Vac - 240 Vac
● Nominal frequency: 50 Hz - 60 Hz
● Ring generator: 75 Vac, 20/25/50 Hz
● Partial voltages: +5 Vdc, –48 V
● Battery charger: 4 x 12 V (40.8 V-55.2 V)
● Power consumption: approx. 90 W