Specifications
HiPath 3000/5000 in the LAN Network For internal use only
P31003-H3560-X100-1-7618, 09/05
4-14 HiPath 3000/5000 V6.0, System Description
3000sb4.fm
HG 1500 V3.0
● Read rights to dynamic parameters of HiPath3000 manager in WBM
● Improved firewall function (stateful inspection, DoS, application level gateways)
● T.38 fax protocol standard support
● Support for HFA workpoints such as optiPoint410 standard or optiPoint600 office
● Logging of QoS data (Quality of Service)
● Licensing system as for HiPath3000/5000 V5.0
● Improved software management
● Cooperation with HiPath 4000 V2.0, for example, DMC (Direct Media Connection)
● Full VPN support (Virtual Private Network)
● HG 1500 V3.0 as module of a PCS (PC-based communication server)
● STMI2 board with 32 B channels onboard, expandable to 64 channels
DMC
This flag enables or disables the feature "DMC Interworking with HiPath 4000 Systems" (in
short "DMC").
In a network with HiPath 4000, DMC enhances the voice quality between IP components (end-
points, gateways).
DMC is only supported by the CorNet-NQ/CorNet-IP networking protocol.
DMC should be disabled in a homogeneous HiPath 3000/5000 network. If a network with Hi-
Path 4000 systems (version 2.0 or later) exists in which DMC is configured, the DMC feature
should be enabled in the HiPath 3000/5000 systems.
The HFA endpoints (optiPoint/optiClient) registered at the HiPath 3000/5000 system and the
HiPath 3000 system itself are then in a position to accept DMC connections set up by the Hi-
Path 4000 and its HFA endpoints. Even if the DMC feature is enabled, DMC is not performed
between HiPath 3000/5000 systems.
If DMC is enabled, the percentage of available DSP channel resources decreases. In other
words, in a HiPath 3000 system only 80% of the channels provided for each DSP are available
for connections (e.g. 6 channels instead of 8, 12 channels instead of 16, 48 channels instead
of 60).
Hardware notes
HG 1500 is a HXGM3 board in HiPath 3750 and HiPath 3700, the HXGS3 board in HiPath 3550
and HiPath 3350 and the HXGR3 board in HiPath 3500 and HiPath 3300. The power supply
comes from the system.