Specifications

3000sb2.fm

P31003-H3560-X100-1-7618, 09/05

HiPath 3000/5000 V6.0, System Description

2-29

For internal use only

HiPath 3000 System Overview

HiPath 3750

The illustrations below show the PCM segments (64 time-division multiplex channels each) be-

tween the different HiPath 3750 system configurations.

Single-cabinet system: PCM segments

Caution

To guarantee that the system operates without faults or blocking, it is necessary that

you observe the following rules for the configuration of boards:

● SLC16, SLC16N

– A maximum of one SLC16 or SLC16N per PCM section. If possible, the

SLC16 or SLC16N should remain alone on the PCM segment.

– For more information on multi-SLCs, see Multi-SLC and Cross-System Net-

working.

● IVML8, IVML24

– A maximum of one IVML8 or IVML24 per system.

– This board may only be inserted into the slot beside the power supply in the

basic cabinet or in the expansion cabinets.

– You may not insert an SLC16 or SLC16N on the PCM segment of the

IVML8 or IVML24.

– You may not insert an SLMO24 on the PCM segment of the IVML24.

– If there is a TMS2 on the PCM segment of the IVML24, only one board with

up to eight ports is allowed on the free slot.

● SLMO24

A maximum of two SLMO24s per PCM segment; the number of connected sta-

tions (hosts (master) and clients (slaves)) may not be more than 64.

Figure 2-8 PCM Segments for a Single-Cabinet System

"8-slot" cabinets