IP Phone User Manual

Step by Step
Customizing the Telephone
104
Beep on Auto Reconnect
You can use this option to specify whether you will hear
a beep when a call is automatically reconnected.
Prerequisite: You are in the "Configuration" menu
 page 91.
> : Select and confirm.
: Confirm. The new setting is displayed.
Idle State Options
System messages are displayed in the fourth line of the
optiPoint 410/420 advance S V7.0.
Prerequisite: You are in the "Configuration" menu
 page 91.
> : Select and confirm.
: Confirm. If multiple messages are received, they are
displayed alternately.
or
> : Select and confirm. The message with the highest pri-
ority is displayed even if multiple messages have been
received. If there are several messages, a plus sign is
visible behind the current message. You can switch be-
tween messages using the plus/minus key.
Inactivity Timeout
Use the timeout setting to specify the period of inactiv-
ity after which the telephone will automatically revert to
the idle state.
Prerequisite: You are in the "Configuration" menu
 page 91.
> : Select and confirm.
: Confirm.
or
> : Select and confirm.
or
> : Select and confirm.
35=Auto Reconnect Beep?>
Switch on? >
36=Idle display static? >
1=Cycle/Flash? >
2=Static? >
38=Inactivity timeout? >
1=No timeout? >
2=30 seconds? >
3=1 minute? >