IP Phone User Manual

Customizing the Telephone
129
Step by Step
Key Clicks
You can decide whether or not to have key clicks to pro-
vide feedback when a key has been pressed. Three vol-
ume levels are available and can be adjusted as indicat-
ed below.
Key clicks are only audible when the phone is in a call
state. You do not hear key clicks when you configuring
the telephone.
Prerequisite: You are in the "Audio Settings"
 page 124 menu.
> : Select and confirm. The current setting is displayed.
You can increase or decrease this value with:
uv the control keys on the telephone or
<> the arrow keys or
o etog the keypad keys.
: Confirm the setting. The new setting is displayed as a
value.
Rollover Volume
You can adapt the volume for rollover as follows:
Prerequisite: You are in the "Audio Settings" menu
 page 124.
> : Select and confirm. The current setting is displayed.
You can increase or decrease this value with:
uv the control keys on the telephone, or
<> the arrow keys, or
o etoi the keypad keys.
: Confirm the setting. The value of the new setting is dis-
played.
7=Key click vol.? >
 >
9=Rollover Volume? >
 >