IP Phone User Manual

DLS Mobility Function

Step by Step

Logging off at the Telephone

Prerequisite: You are logged on as a mobility user.

If available, press the "Mobility" key. The logoff proce-

dure is started.

> : Select and confirm.

: Confirm to start the logoff procedure.

o If requested, enter your User password (default value:

"000000").

The following messages appear on the display:

• "Mobility logoff: Uploading user data"

• "Mobility logoff: Registering..."

• "Downloading user data" (base user)

As soon as the telephone has returned to the "base us-

er", MOB disappears from the display.

If the DLS server is not available in the LAN or an

incorrect server address was stored in the tele-

phone, your logon request is rejected with the

message "DLS Server not available". Please con-

tact your service personnel in this case.

11=Mobility? >

2=Log off? >

If you entered an incorrect User password, the

message "Logoff failed" is displayed until

• you entered the correct User password and

thus logged off successfully, or

• your service personnel cleared the message.

You can also log off using the web interface. For

this feature, please see the Chapte „Web

Interface ( page 206).

If an optiPoint display module is connected and

you use a different language setting as "base us-

er", you are asked to Restart  page 130) the

telephone so that the change of language setting

can also be done for the optiPoint display mod-

ule.