User guide

40 Conducting calls – the basic functions
The consultation is ended and you return to the waiting call
Either: The second user hangs up. You are reconnected with the first party.
or:
Open the system menu.
> < [ Select the menu item and confirm.
You will be connected to the first party again. The second partner hears the busy
tone and hangs up; an
OpenStage handset hangs up automatically.
However, you can also
• toggle between the partners  Page 72,
• set up a conference
 Page 72 or
• transfer the waiting partner to the second partner
 Page 70.
Answering or rejecting a call
Accepting a call
Your handset rings  Page 28. The caller information appears on the display.
The name and/or telephone number of the caller can be displayed. You have the
following options for answering a call:
k The handset is in the charging shell: Remove the handset from the charging
shell (only works if "Auto Answer" is active)
 Page 28.
c or d The handset is not in the charging shell. Press the Talk key or Speakerphone
key.
When you have accepted the call you can:
• transfer the call  Page 70,
• place the call on hold and consult with someone else in the room
 Page 71,
• place the call on hold and call a second partner
 Page 39 in order to forward
 Page 70 or toggle the call  Page 72 or to set up a conference  Page 72.
Rejecting a call
If you do not wish to be disturbed, you can reject the call.
Confirm the message displayed with one of the two display keys. The call is re-
jected and the caller hears the busy tone. You are routed to the other party's
mailbox (if configured) or can program a callback request
 Page 38.
Menu
Quit and return?
Reject call