IP Phone User's Manual

Parameters
56
Default domain name
Enter your Æ Domain name here.
Default Gateway
• Enter the Æ IP Address that was assigned to your Æ PBX in the De-
fault Gateway provided this value was not assigned dynamically by a
Æ DHCP server.
• If the value was assigned dynamically, it is read-only here.
DHCP
• Enable this option if you want a Æ DHCP server to assign the neces-
sary IP data dynamically for the phone.
• Disable this option if there is no DHCP server available in the IP net-
work. In this case, the data for the Te r m i n a l I P A d d r e s s and Ter m i nal
Mask must be manually assigned and the Æ Default Route must be
manually set.
Dialplan enabled
Select on or off to determine whether or not a Æ Dial Plan should be used.
Dial Plan and Download file
Via Browse, scan the local file system for a Æ Dial Plan to download. Se-
lect Download file to send the required Æ Dial Plan to the telephone.
DNS server address
• Only enter the Æ IP Address of the Æ DNS server here if this was not
assigned dynamically by a Æ DHCP server and you are not operating
the optiPoint device at a Æ PBX over Æ HFA.
• Default address: Blank by default.
DNS domain name
• Only enter the name of the associated Æ Domain if you cannot operate
the optiPoint device at a Æ PBX over Æ HFA.
• Default name: Blank by default.
Download Server IP Address
Enter the Æ IP Address of the Æ FTP server here so that you can upload
and download files from/to optiPoint 410.
Domain access code
Access code for Æ Domain