Specifications

hg-06.fm
A31003-H3580-M103-2-76A9, 01-2009
HiPath 3000/5000 V8 - HG 1500 V8, Administrator Documentation
6-41
Nur für den internen Gebrauch
Maintenance
Traces
WBM path:
WBM (write access activated with the Padlock icon in the control area?) > Maintenance > Tra-
ces > (double-click) Trace Profiles > (right-click) user-defined trace profile > Delete Trace Profile
An important warning is displayed. Click Delete followed by OK in the confirmation mask (save
the new configuration status permanently with the Save icon in the control area).
6.6.7 Trace Components
Trace components are gateway components for which process and status information can be
logged. You can view and edit the settings for trace components as well as activating and de-
activating monitoring by trace components.
See also: Section B.1.2, "Overview: Trace Components".
WBM path:
WBM > Maintenance > Traces > Trace Components
Right-click Trace Components to display a menu containing the following entries:
> Display All Trace Components
> Display Started Trace Components
> Display Stopped Trace Components
> Edit Trace Components
> Stop All Trace Components
Trace Components (folder):
Double-clicking Trace Profiles opens a tree structure where you can view the individual trace
components. Trace components with a green bullet point have been started, those with a red
bullet point have been stopped. Right-click an individual gateway to display a menu containing
the following entries:
> Display Trace Component
> Edit Trace Component
> Start Trace Component / > Stop Trace Component
6.6.7.1 Display All Trace Components
You can view a list of all trace components containing detailed information.
WBM path:
WBM > Maintenance > Traces > (right-click) Trace Components > Display All Trace Compon-
ents