Specifications
hg-06.fm
A31003-H3580-M103-2-76A9, 01-2009
HiPath 3000/5000 V8 - HG 1500 V8, Administrator Documentation
6-43
Nur für den internen Gebrauch
Maintenance
Traces
Click Apply followed by OK in the confirmation mask (save the new configuration status perma-
nently with the Save icon in the control area).
6.6.7.5 Stop All Trace Components
You can stop all started trace components at once (see Section 6.6.7.8, "Start Trace Compo-
nent").
WBM path:
WBM (write access activated with the Padlock icon in the control area?) > Maintenance > Tra-
ces > (right-click) Trace Components > Stop All Trace Components
The Traces tree structure is updated.
6.6.7.6 Display Trace Component
You can view detailed information for an individual trace component.
WBM path:
WBM > Maintenance > Traces > (double-click) Trace Components > (right-click) selected trace
component > Display Trace Component
The Trace Component mask: [Name] is displayed. This mask shows the trace component in-
dex, subsystem name, configured trace level and whether the trace level is currently started.
The area Data Included in the Trace Output lists the trace data that is logged for this trace com-
ponent. Exact field descriptions are provided in Section 6.6.7.7, "Edit Trace Component".
6.6.7.7 Edit Trace Component
You can modify detailed information for an individual trace component.
WBM path:
WBM (write access activated with the Padlock icon in the control area?) > Maintenance > Tra-
ces > (double-click) Trace Components > (right-click) selected trace component > Edit Trace
Component
>
Certain trace components either cannot be modified, or only support restricted mod-
ification. Trace component elements which cannot be modified are grayed out.