Specifications

Maintenance Nur für den internen Gebrauch
A31003-H3580-M103-2-76A9, 01-2009
6-50 HiPath 3000/5000 V8 - HG 1500 V8, Administrator Documentation
hg-06.fm
Events
6.7.4.2 Display Event
You can view detailed information for an individual event.
WBM path:
WBM > Maintenance > Events > (double-click) Reaction Table > (right-click) selected event >
Display Event
The Event Reaction Configurations mask is displayed. For descriptions of the individual fields,
see Section 6.7.4.3, "Edit Event".
6.7.4.3 Edit Event
You can modify detailed information for an individual event.
WBM path:
WBM (write access activated with the Padlock icon in the control area?) > Maintenance >
Events > (double-click) Reaction Table > (right-click) selected event > Edit Event
The Event Reaction Configurations mask is displayed. The following fields provide additional
information:
● Event Name: The internal name of the event is shown.
● Send an SNMP Trap: This indicates whether an SNMP trap is sent when the event occurs
(see Section 6.8.2, "Traps").
● Reset Gateway: This indicates whether the gateway must be restarted if the event occurs.
● Notify HiPath: This indicates whether a message is sent to the HiPath system if the event
occurs.
You can edit the following fields:
● Send an E-mail: If this option is activated, an e-mail will be sent when this event occurs
(see Section 6.7.3, "E-mail").
● Associated Trace Profile: You can assign one of the existing trace profiles to this event (see
Section 6.6.6, "Trace Profiles").
● Start/Stop Trace Profile: You can specify whether the selected trace profile should be start-
ed or stopped by this event.
Click Apply followed by OK in the confirmation mask (save the new configuration status perma-
nently with the Save icon in the control area).