Specifications

Maintenance Nur für den internen Gebrauch
A31003-H3580-M103-2-76A9, 01-2009
6-56 HiPath 3000/5000 V8 - HG 1500 V8, Administrator Documentation
hg-06.fm
SNMP
6.8.1.10 Add Trap Community
You can add a new IP address to the trap communities.
WBM path:
WBM (write access activated with the Padlock icon in the control area?) > Maintenance >
SNMP > (double-click) Communities > (right-click) Trap Communities > Add Trap Community
The Add Trap Community mask is displayed. You can edit the following fields:
● IP address: Enter the IP address of the new trap recipient in this field.
● Community: This field defines the SNMP access rights. Enter the community as a charac-
ter string.
Click Apply followed by OK in the confirmation mask (save the new configuration status perma-
nently with the Save icon in the control area).
6.8.1.11 Display Community
You can view detailed information on an individual community (IP address).
WBM path:
WBM > Maintenance > SNMP > (double-click) Communities > (double-click) Read Communi-
ties or Write Communities or Trap Communities > (right-click) selected IP address > Display
Community
Depending on your selection, either the mask Read Community, Write Community, or Tra p
Community is displayed. The IP address and community name is displayed.
6.8.1.12 Edit Community
You can edit detailed information on an individual community (IP address).
WBM path:
WBM (write access activated with the Padlock icon in the control area?) > Maintenance >
SNMP > (double-click) Communities > (double-click) Read Communities or Write Communities
or Trap Communities > (right-click) selected IP address > Edit Community
Depending on your selection, either the mask Read Community, Write Community, or Tra p
Community is displayed. You can edit the following fields:
● IP Address: Enter the IP address of the new trap recipient in this field.
● Community: This field defines the SNMP access rights. Enter the community as a charac-
ter string.